Before calling for a countertop quote, you need accurate measurements. You don’t need to be precise to the millimetre — we take a professional laser template before fabrication — but an accurate rough measurement lets us give you a realistic price without a site visit. Here’s exactly how to measure your kitchen countertops for a quote.
What You Need
- A measuring tape (standard, at least 10 feet)
- Paper and pencil to sketch your layout
- 10 minutes
Step 1: Sketch Your Kitchen Layout
Draw a rough top-down view of your kitchen — it doesn’t need to be to scale, just proportional enough to label each counter section correctly. Mark which walls have countertops. Common layouts in GTA kitchens:
- L-shaped: Two counter runs meeting at a corner
- U-shaped: Three counter runs (most common in larger GTA semi-detacheds and detacheds)
- Galley: Two parallel counter runs facing each other
- Single wall: One counter run (condos, small apartments)
- Plus any island or peninsula as a separate piece
Step 2: Measure Each Counter Run
For each counter section, measure:
- Length: From one end to the other (or to the corner). Measure along the wall.
- Depth: From the back wall to the front edge of the counter. Standard kitchen counter depth in Canadian homes is 25–26 inches (including overhang). If you have standard cabinets, you can note “standard depth” and we’ll use 25.5″.
Don’t subtract for the sink or cooktop cutouts — quote the full square footage and we’ll account for cutouts in the fabrication (cutout pieces are waste, not billable material).
Step 3: Calculate Square Footage
For each counter section: Length (inches) × Depth (inches) ÷ 144 = Square feet
Example: A counter run that is 96″ (8 feet) long × 25.5″ deep = 2,448 sq inches ÷ 144 = 17 sq ft
How to Measure an L-Shaped Corner
For L-shaped kitchens, measure each leg of the L separately — do not try to measure the corner diagonally. Measure:
- Leg A: Full length from end to the outside edge of the corner cabinet, × depth
- Leg B: Full length from the outside edge of the corner on the other side, to the end of the counter, × depth
Then add both square footages together. The corner area is counted once (it belongs to whichever leg’s measurement extends to the outer corner edge).
How to Measure an Island
Measure the island countertop as a separate piece: length × width in inches, divide by 144 for square feet. If you want a waterfall edge (countertop continues vertically down the sides), also measure the height from floor to countertop top and note which sides will have the waterfall — this requires additional slab material.
Standard Countertop Dimensions Reference
| Measurement | Standard Canadian Dimension | Notes |
|---|---|---|
| Counter depth | 25.5″ (including ~1″ overhang) | Matches standard 24″ base cabinets + 1–1.5″ overhang |
| Counter height | 36″ from floor | Standard; may vary if you’re adjusting for accessibility |
| Island depth (each side) | 24″–30″ | Wider islands for seating: 36″+ on seating side |
| Bar overhang (seating) | 12″–15″ overhang | Standard seating overhang for bar stools at an island/peninsula |
| Bathroom vanity depth | 21″–22″ | Standard vanity cabinet depth + ~1″ overhang |
Do I Need to Measure Precisely Before Calling?
No — rough measurements within a few inches are fine for a quote. Here’s why: the quote is based on your approximate square footage to give you a price range and order of magnitude. Before we fabricate anything, a technician comes to your home for a precision laser template that captures every measurement to the millimetre. That’s the measurement that controls fabrication — not your tape measure.
So don’t delay calling for a quote just because you’re worried about measuring accuracy. Send us rough numbers — that’s all we need to start the conversation.
Example: How to Describe Your Kitchen for a Quote
When you call or WhatsApp us, you can simply say: “I have an L-shaped kitchen. One side is about 10 feet long and the other is about 6 feet long. Standard depth counters. I also have a small island that’s about 5 feet by 3 feet. Looking at mid-grade quartz.”
From that description, we can calculate approximate square footage (roughly 40–45 sq ft for the perimeter + 15 sq ft for the island = ~55 sq ft total) and give you a price range within minutes.
Frequently Asked Questions
How do I calculate square footage for kitchen countertops?
Measure each counter section in inches (length × depth), divide by 144 to get square feet, and add all sections together. Standard depth is 25.5″. For an L-shaped kitchen, measure each leg separately. Don’t subtract for sink or appliance cutouts — quote the full area.
How many square feet is an average kitchen countertop?
A small GTA condo kitchen: 15–25 sq ft. A standard semi-detached kitchen: 30–45 sq ft. A larger detached kitchen with island: 50–80 sq ft. A large open-plan kitchen with island and peninsula: 80–120 sq ft.
Do I need to measure before calling for a quote?
Rough measurements are sufficient — within a few inches is fine. Precise measurements happen during our technician’s laser templating visit, which occurs after you approve the quote. Don’t delay calling because of measuring concerns — approximate numbers are all we need to give you a realistic price range.
Ready to Get Your Quote?
Call or WhatsApp (437) 350-7779 with your approximate dimensions — we’ll send a written quote same day. Showroom at 20 Venture Drive, Scarborough, ON M1B 3R4 (open Mon–Sat 9am–6pm).
Also see: Kitchen Countertops Buyer’s Guide | Quartz Countertops GTA | How Long Does Installation Take? | Kitchen Renovation Cost GTA
Granite Nations — Serving Durham Region & GTA
We supply & install granite, quartz & kitchen cabinets across Durham Region & GTA. Free in-home quotes. Call 647-274-2047
- Granite Countertops Scarborough
- Quartz Countertops Scarborough
- Granite Countertops Ajax
- Quartz Countertops Ajax
- Granite Countertops Pickering
- Quartz Countertops Pickering
- Granite Countertops Whitby
- Quartz Countertops Whitby
- Granite Countertops Courtice
- Quartz Countertops Courtice
- Custom Kitchen Cabinets GTA
- All GTA Service Areas